How to easily connect my chipless tablet to the internet via USB cable

Who I am
Craig Zacker
@craigzacker
Author and references

Connect your tablet to the internet via USB cable

We must be clear that the tablet with a chip, without a doubt, makes this mobile device a very valuable tool. Thanks to the chip we have a Internet connection everywhere, thanks to the mobile data that our telephone company offers us.

So you might think that connecting the chip-free tablet to the Internet could limit its performance. You can only use it in places where you have internet access. Suppose the tablet can't connect via Wifi, can it be connected via USB cable to the Internet? Yes of course! To do this you must have a computer with internet, if you already have it, then we will explain step by step how you can configure the tablet, and then connect it to internet via USB cable.



Steps to connect your tablet to the Internet via USB cable

The first thing you need to do is connect the data cable (USB cable) to the connector on the tablet, then to any one USB port of your computer. Then, go to the configuration or settings of the tablet, click on the option other and select the section with the name of " network connection and mobile Wi-Fi point ". As a reminder, this option on some tablets has a different name, however you need to check that it is the option to set up your tablet's network or Wi-Fi connection.

We are fine so far, right? So let's move on to the last step. Press the option " USB connection ”(On some tablets, you have to press it several times). And that's it, you have already activated the USB cable internet connection function.


Now if you can take advantage of this awesome tech tool. But what other ways to connect a tablet without Chip do you have at hand? Let's take a look at other methods below.


Other Connection Methods

There are many ways to connect the tablet to the internet, we have already seen one of them which is how to connect the chipless tablet to the internet via USB cable. But now we will look at 2 more ways to connect a tablet to the internet. One way is through a network cable, the other alternative is to connect a USB Internet modem on the tablet.

Network cable

To connect a chipless tablet to the Internet via a network cable, you just need to get a RJ45 cable adapter or a network cable. This adapter must fit properly into the slot where we place the tablet charger.

By connecting the network cable to the RJ45 adapter, you can automatically enjoy the Internet connection easily. It should be noted that this is an eco-friendly alternative because we avoid using Wi-Fi.


Internet modem via USB cable

First of all, you need a OTG cable, this cable connects to the charging slot of the tablet. Now, with the table turned off, connect the OTG cable to the tablet and the USB Internet modem to the other end. Turn on the tablet, when you log in you should automatically wait for it to recognize the modem. And it's so quick and easy you'll get the internet!


Follow these steps and get the most out of your tablet wherever you are; It doesn't matter if it doesn't have a chip, as as you can see you can connect your tablet to the network via USB cable or in other ways.

If you liked this article, you can leave us your opinion in the comment box and share it with your friends or family.


add a comment of How to easily connect my chipless tablet to the internet via USB cable
Comment sent successfully! We will review it in the next few hours.