How to Easily Fix Error Code 0x80070057 in Windows 10

Who I am
Pavel Yosifovich
Author and references

Why does error 0x80070057 occur?

There is more than one reason why this error appeared on your Windows computer screen. The first reason for this error could be because an error was detected in the system partition. It is possible that a sector is in poor condition or is simply not configured as expected.

So, if you decide to download and install Windows 10 from 0 and on your computer and this error could pop up without warning and mess everything up. The second reason could be that when the decimal symbols were created in the system, it is been carried out a incorrect configuration and apparently we see this error.

Il software on your computer it can present problems if it is third-party software and if it uses a language other than English.

How to Fix Error Code 0x80070057 in Windows 10 Easily?

Whatever the case may be or why this error occurs on your Windows computer, the truth is that fixing it is not as difficult as it seems at first.

When the partition encounters a failure

As mentioned above, this error is shown when you try to install Windows on the computer, it can be "complicated" to deal with because the immediate solution is to format.

Despite this, we will show you a very simple way to go through the procedure. The first thing to do is to access the "Command Prompt" by pressing "Shift + 10" at the same time.

When you do this, the tab corresponding to this will open, there you need to write "Diskpart" and then select "Enter" to continue. So you have to run a "List Disc", look very well how you do this part of the process as it is very important.

Check which partition is the one with the error, see in detail if the size matches or not. For example, if in this case the partition is identified with the number "0" you must select "Disk 0".

Continue the process by typing the "Clean" command and selecting "Enter". Once this is done you can start by creating the partition where we hope to install the new Windows.

Now you can execute the command “create primary partition size = 500000”, then proceed to write “Partition list” to select the boot partition where the Windows you install will be placed.

Once the partition is selected, the process ends by activating what you just did by clicking on "Active". We will proceed to format the computer in NTFS o formattare fs = ntfs quick. Once this is done, all that remains is to exit Diskpart by selecting "Go out" doing the same in the Command Prompt.

You will just have to update or refresh the Windows installation screen using "F5" and then you will see the results made in the partitions.

When there is a bad configuration in the decimal symbols

While this is not very common, the truth is that it can happen and be shown with these kinds of errors. So to solve this problem you need to make a change or adjustment to the decimal symbols to put everything back in order.

To start this adjustment process you need to open the "Control panel" and go to the “Clock” section of your computer. Select the option "Tongue" and then the option "Region".

Proceed by selecting the respective formats window and then go to the “Additional Settings” menu. While there you can make any changes you want to the decimal symbol and at the end you will have to save the changes by pressing "OK" twice. If you want to remove the BIOS password in Windows 10 you can enter this article where we will teach you how to do it.

This will be all you will need to do, of course, so that you will notice the changes made to the decimal symbols you will have to restart your computer.

add a comment of How to Easily Fix Error Code 0x80070057 in Windows 10
Comment sent successfully! We will review it in the next few hours.